2.212,00 kr.
Get ready for the 2nd generation of speed controller.
NITRIDE 1/10 G2 is a new generation electronic speed controller for sensor-controlled brushless DC motors. Thanks to advanced cooling technology based on a heat sink made of aluminum nitride ceramic, NITRIDE 1/10 has excellent thermal conductivity and can be used with powerful motors from 4.5 T.
NITRIDE 1/10 G2 offers revolutionary real-time monitoring of battery current and discharge, as well as innovative intelligent algorithms to protect the ESC in the event of motor failure or mechanical problems. NITRIDE 1/0 G2 has a matte TFT color LCD display and does not require any additional interface. Easy setting adjustment with 3 buttons on the display.
Tilgængelig på restordre
Programmable Parameters and Functions:
• Revolutionarily easy Rx calibration.
• Real-time monitoring: battery voltage, ESC and motor temperatures, engine diagnostics and more.
• Revolutionary monitoring of battery power and discharge.
• Pre-race diagnostics: engine temperature, sensor cable, faulty motor, battery, BEC voltage and more.
• Easy programming: throttle, brake, boost and turbo timing, Hall angle and many other functions.
• Record race data, temperature and other corners, histograms, and more. The data is stored after the ESC is turned off.
• Adjustable maintenance reminder for easy checking.
• No programming interface required.
Key features:
• TFT LCD color display, matte finish – The 160 x 80 pixel resolution color LCD display allows you to set all parameters and check all data directly on your ESC without the need for a programming card or mobile application. Everything you need is in your ESC. The operation is really simple – with 3 buttons you can quickly set everything you need, and a single glance is enough to check all the parameters necessary for the race. Simple. Fast. Precise.
• Easy checking and adjustment – The display gives you an overview of all important data and events – pre-race, during and after the race. You can quickly change your settings and get instant feedback, without the delay of connecting an external control interface.
• Advanced cooling technology – NITRIDE Advanced cooling technology based on an aluminum nitride heat sink specially developed for NITRIDE gives the ESC excellent thermal conductivity and long-term resistance to high temperatures and stresses. MOSFET transistors are directly cooled without an additional thermal resistance layer! In its production, ELCERAM used very thick layers of special materials such as silver and copper for very low internal resistance and the latest technologies inspired by the advanced power systems designed and manufactured by ELCERAM.
• For even better cooling, NITRIDE 1/10 G2 has additional aluminum cooling fins and a port for Intelligent FAN in case required under special conditions.
• Reverse polarity protection.
• Intelligent algorithms for ESC protection.
• Dimensions – Despite its many great new features, the NITRIDE 1/10 G2 is very compact and even smaller than Generation 1. Its dimensions are suitable for all types of 1/10 RC cars. In addition, 70% of the weight is on the bottom of the ESC, which gives your car even more stability!
• Easy installation – Installation of the NITRIDE 1/10 is quick and easy – it can be attached to the chassis with an aluminium mounting plate (included) or bolted directly to a suitable location, ideally with good thermal conductivity. For 4.5T and 5.0T motors, we recommend using a passive heatsink or an external fan for better cooling effect, if desired.
• In addition, the cover of the ESC with display and buttons can be easily replaced in the event of an accident.
• Zero timing (blinking mode) is supported.
• External capacitors required (included)
Specifications:
Scale: 1:10 Onroad and Offroad, Stock, Open Stock, Modified and other categories Type: Brushless Sensored Waterproof: No
Reverse polarity protection: Yes
Continuous/peak current: 180 A / 1500 A
Input voltage: 2S LiPo
Adjustable BEC output voltage: 6.0-7.4 V BEC continuous/peak current: 6 A/12 A
Size: W 34 x L 36.5 x H 24 mm
Weight: 59 g without cable
BEC cable length: 180mm, gray stripe is negative pole
Applications: Sensor-controlled brushless DC motors from 4.5 T
