Beskrivelse
Features
- Ready-to-run 1/10 scale trail vehicle with molded ABS hard body interior and Optic body.
- H10 Hydro front axle with simulated hydraulic steering and integrated skid plate.
- Steering servo mounted behind the axle and isolated from the chassis on a 4-link suspension system.
- VDI universal front axle shafts provide up to 47 degrees of steering angle.
- H10 axles are 0.600 inches wider than F10 axles for increased stability.
- Durable drivetrain featuring machined 30/8T hypoid ring and pinion gears.
- Proven VFD transmission with 6% overdrive and transfer case equipped with metal gears and full ball bearings.
- Hobbywing Fusion SE 1800KV brushless 2-in-1 motor and ESC combo with FOC technology for precise low-speed control.
- Officially licensed Toyo Tires Open Country R/T Pro Red Compound tires measuring 4.9 x 2.2 inches.
- Detailed Sparco interior featuring EVO L QRT seats, Air Pro RF-5W helmet, Land+ gloves, racing suit, and harnesses.
- Convenient battery access through a side panel pin-and-latch system.
- VT-1 digital 4-channel transmitter with model memory and VS-1 metal gear steering servo delivering 200 oz-in of torque.
Technical Details
- Scale: 1/10
- Tires: Toyo Tires R/T Pro Red Compound 4.9 x 2.2 in
- Axle Ratio: 3.75:1
- Pinion Gear: 15T (32dp)
- Spur Gear: 56T (32dp)
- Overall Width Hex-to-Hex: 206 mm
- Wheelbase: 337 mm
- Overall Height: 200 mm
- Overall Front Ratio: 41.3:1
- Overall Rear Ratio: 44.0:1
- Final Overdrive: 6%
- Ready-to-Run Weight without Battery: 2.43 kg
- Battery Tray Dimensions: 93 mm x 36 mm x 42 mm
Operation & Maintenance Notes
Before the first run, check all critical screws and wheel nuts to ensure they are properly tightened. After driving in wet, dusty, or muddy conditions, the vehicle should be thoroughly cleaned and dried. Moving drivetrain components and bearings should be inspected regularly for smooth operation and maintained with suitable RC lubricants when necessary.
Important Notice
This ready-to-run vehicle includes the H10 chassis with installed electronics, motor and ESC combo, servos, and VT-1 transmitter. A 2S to 3S LiPo battery compatible with the battery compartment dimensions of 93 mm x 36 mm x 42 mm and a suitable charger are required for operation. Please note that both the battery and charger must use an XT60 connector. Transmitter batteries are sold separately.

















